How to Clean a Rug at Home in the Bath?

To begin, it’s crucial that you learn the skill of figuring out the labels attached to rugs. These labels provide valuable information about the rug’s care instructions, including permissible actions, suitable washing methods, water temperature, drying techniques, cleaning approaches, and more. It’s astonishing how to clean a rug at home in the bath. So, let’s get started!

Step 1: Preparation

1. Clear the bathroom: Start by removing any obstacles or items from the bathroom to ensure you have enough space to work with.
2. Gather the necessary supplies: You will need a mild rug cleaner, a soft-bristle brush, clean white towels, a spray bottle, and access to warm water.

Step 2: Vacuuming

1. Begin by thoroughly vacuuming the rug to remove loose dirt, dust, and debris. This step will make the subsequent cleaning process more easy and effective.

Step 3: Spot Cleaning

1. Inspect the rug for any visible stains or spots. Treat them individually using a rug cleaner designed for your rug’s fiber type.
2. Follow the instructions on the cleaner and gently blot the affected areas with a clean white towel, working from the outer edges towards the center. Avoid rubbing harshly, as it can damage the fibers. We recommend attempting the process on a small part of the rug first. Apply a mixture of mild detergent and water to one corner and gently rub the area. If you notice any bleaching or discoloration, it indicates that professional cleaners should clean your rugs.

Step 4: Preparing the Bath

1. Fill the bathtub with warm water, ensuring there is enough to submerge the rug thoroughly.
2. Add a small amount of mild rug cleaner to the water, following the product’s instructions. Avoid using harsh chemicals that may damage the rug. Also, it is possible to create your own rug shampoo by combining one cup of white vinegar with a gallon of water. Alternatively, you can use dish soap, white vinegar, water, liquid fabric softener (if desired), borax powder, or any laundry detergent containing bleach. Blending these ingredients will result in a creamy liquid that effectively cleans your rug.

Step 5: Submerging and Agitating the Rug

1. Carefully place the rug into the bathtub, ensuring it is fully immersed in the soapy water. Let the rug slowly soak in the water.
2. Gently agitate the rug with your hands or a soft-bristle brush, working the cleaner into the fibers. Pay extra attention to high-traffic areas and stains.
3. Allow the rug to soak in the soapy water for 30 minutes or an hour to loosen dirt and grime.

Step 6: Rinsing and Removing Excess Water

1. Drain the soapy water from the bathtub and refill it with clean,  warm water. Leave it in the water for another 1-2 hours.
2. Rinse the rug thoroughly by submerging it in clean water and agitating it to remove any remaining soap residue.
3. Repeat this rinsing process until the water runs clear, indicating that the rug is free of soap and clean.
4. In the last rinsing, use cold water. Using only cold water will not cause any shrinkage as there is less potential that the color will be leached out while you try to remove soap and detergent remains. Coldwater does not interfere with the dyes and assists in keeping your rug looking fresher.

Step 7: Drying the Rug

1. Gently squeeze out the excess water from the rug without wringing or twisting it, as it can damage the fibers.
2. Lay the rug flat on clean white towels or a clean surface, preferably in a well-ventilated area away from direct sunlight.
3. Allow the rug to air dry completely, periodically flipping it over to ensure even drying. This process may take several hours or even a day, depending on the rug’s thickness and the materials used in its fibers.